Home / Fabrication Guide
Fabrication Guide
How we install
A good finish starts with good preparation.
We follow the same 8 steps on every job.
Measure
Measure every surface and plan the cuts.
Putty & sand
Fill gaps and sand until the surface is smooth.
Prime
Apply Hyundai primer for a strong bond.
Cut & sort
Cut the film to size and sort by surface.
Sand & check
Check the surface again before wrapping.
Wrap
Apply the film and work it around edges and corners.
Clean up
Clean the installed area thoroughly.
Final check
Check every seam and edge, then hand over the space.
Spec Sheet
Typical roll specification for Korean BODAQ film.
Details can differ slightly by series.
Ask us for the data sheet of your pattern.
| Made in | South Korea (Hyundai L&C) |
|---|---|
| Material | PVC (polyvinyl chloride) |
| Structure | Transparent film, printed layer, base sheet, adhesive layer, release film |
| Thickness | approx. 0.2 mm (200–250 µm by series) |
| Roll width | 48 in (approx. 1,220 mm) |
| Roll length | 164 ft (approx. 50 m) |
| Coverage per roll (1 box) | 61 m² (656.5 sq ft) |
| Adhesive | Acrylic, with air-bleeding grooves |
| Use | Interior only |